As a security expert, I get this question very often and it’s one of the most common calls a locksmith gets when someone puts a key into their door and it just won’t turn.
If you want to try something quickly the best fix is usually spraying some WD40 inside the keyhole, then putting your key in and trying again. Try 5 more times since this can dislodge some debris.
A lock with a key that won’t turn in the door is usually a sign of a problem with the lock cylinder.
A lock cylinder is an internal part of the door’s locking mechanism. When you insert your key, it rotates to align with the bolt mechanism and release it. If it doesn’t turn this could be caused by corrosion or debris in the lock as well as dirt accumulating on its surface.
On the off chance that you’re in a rush and ran into an issue with your lock, or you just don’t have a lock, these simple tricks can be used to lock any door without one.
You simply cannot leave the room since the door will be left open. Knowing how to lock a door without a lock may provide some peace of mind and solid security.
You may utilize items you already have in your house, or you can buy portable door locking devices. The important thing is to do it correctly.
Problems on an outdoor lock
It is a more common problem to find a lock that does not turn and is outdoors because of the prevalence of corrosion. Debris and dirt can be enough to entirely clog locks that face a home’s exterior or any structure.
An efficient solution is to use a lubricant to prevent friction from dust and dirt. There is a wide variety of lubricants that come as a spray. The person can use this lubricant in the keyhole, something like wd40 can do the trick. Then insert the key to release the plug and turn the lock.
Using the lubricant once is not enough on many occasions. The user should use a little more lubricant and insert the key five or six times. This can remove the grease and dirt that gets in the way of the lock. WD-40 is the most common lubricant available.
Sometimes this problem is only temporarily resolved and then recurring. If this is what happens, the person probably needs to call a locksmith and replace some lock components.
Another common situation is that the key does not fit completely. There may be a buildup of dirt that manages to hinder the lock’s functionality. When a simple lubricant does not work, it can be helpful to call a locksmith for more drastic measures. This can prevent specific problematic outcomes, such as complete breakage of the lock or key.
Problems with a lock inside the house
Door locks on the inside of a home usually offer a longer lifespan. These locks are also minimally exposed to corrosion.
Using lubricant is an excellent option for these as well, as it is for any mechanical device. You can also apply dry lubricant inside the lock through the keyhole. You should insert the key several times after using the lubricant.
As with the lock on the outside, this step can remove the debris inside the lock. This entire procedure must take place with care to avoid further damage to the lock. There is also the possibility of calling the locksmith if using lubricant does not work.
Carlock problems
A car lock can also present problems, especially if it is the car door lock. A car is constantly facing high temperatures in summer or low temperatures in winter. All this can impair the proper functioning of the lock.
The noticeable difference is that the costs to repair the lock to a car are higher than the costs for an indoor house lock. First, check that the temperature is not too low due to cold weather. The problem can be due to partial freezing of the lock. (1)
A hairdryer or similar tool can provide warm air to thaw this part of the lock. You can try wd40 and inserting the key and taking it out a few times to clear debris.
In any case, a locksmith is recommended, as an inexperienced person could make the situation worse by breaking off the key in the lock or filling down the metal inside. A worsening position means higher costs for the vehicle owner.
Adding a little lubricant is the best solution. The lifespan and wear and tear of each lock are different so your mileage may vary.
The above solutions are only temporary, as new locks are strongly recommended for increased protection and security.
Reference:
(1) partial freezing – https://agris.fao.org/agris-search/search.do?recordID=US201303093701
