Different devices can optimize the security and protection of a home. An entry alarm is one of the most popular devices due to its versatile functionality and easy installation. We can mention each of the important steps for those who wish to install this device.
Before you proceed, here you can take a look at the best driveway alarm in the market this year! And if you’re up for a DIY project, you can check this guide on how to make a homemade driveway alarm.
Step-by-step Installation Procedure
The various kits that are available on the market may offer components of different quality. The user should consider that it is a weatherproof sensor in order not to count on a too short operation. The alarm sensor may need some batteries if it does not require a power outlet. (1)
Rechargeable batteries can be an excellent way to save money instead of buying a lot of conventional batteries. Some switches can also be incorporated inside and that the settings can be fine-tuned.
Devices that can run on batteries are ideal when you need to install this device away from a power outlet. The battery set can provide a usage time of a few days. Those who do not want to spend a lot of money on batteries can choose a sensor or alarm that requires a power outlet.
1. Choosing the best location
Front door
There is no single entrance or single location where you can install this alarm. One of the first options people may consider for installation in the front door of the home. It is very helpful to choose the most appropriate location and that the sensor can cover the front door entry area. (2)
The different alarms that are available today may incorporate different tones to complement the functionality. Some people may choose the default tones, while others may choose all very peculiar ones such as barking dogs. It is always recommended to have the best location.
Side Patio Door
Many homes have some type of side yard door or some door in this back section of the home. Sometimes this can be chosen by some intruders to gain entry into a home. Installing the installation on this entry door can provide a much more appropriate and secure result.
The main entrance door may be too obvious a choice for intruders. Some of them may choose a secondary door such as a backyard door or a side door. Covering these spaces was something very comfortable to live in more securely.
Garage door
The garage door is one of the most obvious choices that people can choose to be able to protect the home. Even the garage is one of the favorite spaces for many people to do different DIY projects. It is really important to take care of this sector of the home by installing an entry alarm.
Some may even choose the garage door as a very suitable option since a wide variety of very useful tools can be found in this place. To prevent the garage from being a very vulnerable space could be chosen for the installation of this type of device.
2. Performing the installation
You just need to install the alarm sensor in a very simple way. The instructions are usually built-in and no kind of obstacle is difficult to overcome. The installation requires the sensor to be located in an important area that signifies the entrance to the home.
It can even be an excellent decision to choose a subtle and suitable location and that this sensor has not been detected. When the sensors are detected, intruders might choose another way to enter your home. It is also recommended to choose more than a single site when it comes to installing an entry alarm.
To perform the installation requires the use of a drill and a special drill bit depending on the surface on which the installation will be performed. The four corresponding holes must be drilled to correctly fix the surface of the device. The plate of the device must be fixed against the wall.
The user should consider that this device or alarm sensor is not exposed to direct sunlight. This can simply deteriorate and drastically decrease the lifetime of this alarm sensor. Many options that are available in the market can incorporate some kind of hood.
It is always preferable to have a covered place that is not exposed to sunlight. The top of a wall or some nook of a gable roof is perfect for installation.
3. Checking the result
Once the device or the different devices have been installed and synchronized it is necessary to perform the test in the different locations. Such an alarm should trigger a certain sound and in some cases send a notification to the user.
Properly checking each of these devices is what will allow you to live safely and securely at all times. It is recommended to test again and again the different locations you have chosen to install the entry alarm.
This can also be very useful to be able to modify the location of each of the sensors. It would be necessary to move the sensor down, up, left, or right. The sensors should be tested in different ways and at different angles.
Performing this whole procedure can be a bit arduous but it is what will prevent intruders. Once you are done with this procedure you can relax and your home will be more protected.
Final words
The entry alarm is one of the implements that allow you to optimize the safety and security of a family. It is necessary to carry out the installation considering each of the most important aspects of it. This is what will allow you to have a much more secure and peaceful home to live in with your family.
References
(1) sensor – https://www.thomasnet.com/articles/instruments-controls/sensors/
(2) alarm – https://www.hunker.com/12492827/five-different-types-of-alarms
